SEAGULL P26A Peashooter (26-30cc) 1.8m (71in)

WHAREHOUSE STOCK

Key Features

• Lightweight, high quality balsa and plywood construction.
• Eye-catching scale colour scheme.
• Finished in genuine Oracover film.
• Factory painted fibreglass engine cowl and wheel spats.
• Large open cockpit encourages additional detail.
• Removable cockpit hatch for easy radio, tank or flight battery access.
• Plug-in outer wing panels simplify transportation and storage.
• Full hardware pack included for either glow or electric power.
• Numerous scale details including dummy engine and bracing wires.
• Authentic inset flaps.
• Crystal clear screw-on windscreen.

What’s in the Box

• 1x Factory assembled and covered fuselage.
• 1x Factory assembled and covered 2-piece wing set.
• 1x Factory assembled and covered tail set.
• 1x Clear windscreen moulding.
• 1x Pilot figure.
• 1x Factory painted glass fibre cowl.
• 1x Wheel spat set.
• 1x Comprehensive hardware pack (screws, horns, pushrods, fuel tank etc.).
• 1x Sprung / steerable tail wheel unit.
• 1x Oleo-style sprung / braced undercarriage set.
• 1x Landing and flying wire kit.
• 1x Comprehensive instruction manual.

Needed to Complete

• 1 x 26 – 30cc petrol engine, glow engine or electric equivalent.
• 1 x 6-channel (minimum) computer transmitter and receiver combo.
• 1 x Propeller to suit your engine / motor.
• 8x Standard size, digital, metal gear servos.

Product

Seagull has done it again with this outstanding 1/5-scale rendition of the ‘tween wars Boeing P-26 Peashooter. Famed for being the first American all-metal production fighter, the P-26 first flew in 1932 but quickly became the victim of rapid progress in aviation. Just three years after its first flight the aeroplane’s wire-braced wings, fixed landing gear and open cockpit were competing with the enclosed cockpit, retract-equipped and aerodynamically clean Curtiss P-36, Messerschmitt 109 and Hawker Hurricane. But what a fabulous subject for an unusual scale R/C model.

Built to Seagull’s usual high standards, beautifully covered and finished, and perfect for any 30cc petrol engine, or glow / electric equivalent, this is a model that has undeniable presence. With the four primary controls, inset flaps and no retracts to worry about, it’s a practical, all-occasion flier, one that any intermediate or experienced pilot will quickly fall in love with.

Specification:

Wingspan (in):	71
Length (in):	62.2
Wing area (sq. in):	965
All-up weight (lb):	14

Aircraft Technical Specifications

Weights & Dimensions

Approx. Flying Weight	kg	14lbs
Shipping Weight	0.00kg	0.00lbs
Product Length	1,580mm	62.2in
Product Wingspan	1,800mm	71in
Product Wing Area	62dm2	965in2

Scale	1:4.7
Completion Level	ARTF
Experience Level	Intermediate / Expert
Recommended Usage Environment	Designated R/C model flying site
Material	Wood