WOT 4 Foam-E Mk2+ ARTF

The model comes supplied pre-installed with a powerful brushless outrunner motor, matching 40A, brushless, electronic speed controller and 4 x 9g micro servos. All you need to add is your preferred receiver/transmitter combo and a 3S 2200mAh Li-Po of your choice.

Like the previous version, the Mk2+ only requires minor assembly to get airborne. No glue is required, only a cross headed screwdriver, a 10mm spanner and some double sided tape to mount your receiver.

Buried inside the structure there are numerous changes to the internal design. The tailplane has been re-designed for improved styling with solid tips and inset elevators for improved style and improved control response. The aileron servos now have ‘trapped’ sockets to make upgrading the servos easy without losing the socket inside the wing! The tail wheel has also been re-designed to be bolted on, allowing easy removal if accidentally broken. The control surfaces use ‘live’ moulded foam hinges with plastic hinge re-enforcement for extra security and peace of mind. Just like the previous version the control surfaces have carbon fibre re-enforcement for optimal control authority.

The colour scheme has been changed from the previous blue, black and white scheme to a new ‘easy to apply’ scheme in the yellow, orange and red colours that are synonymous with Chris’ classic designs. If you want your Wot4 Foam-E to really stand out, then you can customise it using one of our option decal kits. (Available separately ‘Z-CF020/12B’ & ‘Z-CF020/12C’)

The new Mk2+ retains all the flying characteristics that made the previous version so popular. The Wot4 Foam-E Mk2+ has a huge flight range, if you open the throttle you have a 1:1 power to weight ratio perfectly suited to sports aerobatics manoeuvres. Where the Wot4 Foam-E excels is its wide speed range, if you lower the throttle you can fly slowly and use little space. It makes for a perfect first aerobatic model for newer pilots and a really fun sports model for experienced pilots.

• New Bright Colour Scheme
• Pre-Installed Brushless Motor, ESC and 4 x 9g Servos
• Re-Designed Tailplane and Elevator
• Foam ‘Live’ Hinges with Plastic Hinge Reinforcement
• Modified Internal Structure
• Removable Tail Wheel
• Aluminium Undercarriage
• Option Decal Kits Available

Specification

Propeller:

11 x 8″ (Inc.)

Wingspan:

1205mm (47.4“)

Length:

1050mm (41.33“)

Weight:

1100g (2.43 lbs)

Servos:

4 x 9g Micro (Inc.)

Radio System:

4 – 5 Channel (Req.)

LiPo:

3S 2200mAh 30C (Req.)

Electric Motor:

Brushless Outrunner (Inc.)

Speed Controller:

40A Brushless (Inc.)